Sunday, August 8, 2021

My Wedding Dress - The Skirt (Part Six)

 I had a complete bodice for my wedding gown, it was time to make the skirt and turn this thing into a complete dress!


There would be two parts to the skirt - the basic, floor-length, silk foundation skirt (Which would be constructed like any Early Victorian/Mid 19th Century skirt, something I knew how to do no problem!) and the net lace asymmetrical overskirt. (Which I still hadn't figured out a solid game plan for, so I'd be crossing that bridge when I came to it. Pattern Hacking? Draping? Cutting my fabric and hoping for the best? Anything was possible!)


After I finished the bodice, I tried it on over my corset, hoopskirt, and petticoats and had my mom measure from the bottom edge of the bodice to the floor at the center front, center back, and side seams. I added a few inches to these measurements for seam allowance and extra wiggle room, then cut 3 panels of my 55" wide silk twill to this length.


After reading Bridal Couture I came to the conclusion that it really would be best to flat line my skirt, so I ordered some silk organza for that purpose. After I cut my silk twill skirt panels, I ironed them flat, cut silk organza panels to the same dimensions as the silk twill panels, then pinned the two layers together.


Proper procedure would have then been to baste the two layers together on every panel, but I couldn't be bothered. Once the two layers were pinned together, I just went ahead and pinned all my skirt seams in place.


I sewed up all the skirt seams, making sure to leave the top 12" or so open so I could make my button placket once the skirt was attached to the bodice. Then I ironed all the seams open.


You may notice I didn't mention anything about putting pockets in any of the skirt seams. That was intentional. I decided my wedding dress didn't need pockets I know, what a disgrace! But hear me out.
Usually I carry my phone and my pocket knife in my dress pockets, and I didn't think I needed to have either of those things on me for my wedding. Also, the lace over skirt would have made getting to pockets in the skirt seams tricky. So I just didn't feel the need to put pockets in my wedding dress. I did, however, put pockets in all the bridesmaids' dresses, so anything I needed could just be stuck in one of their pockets.



Side seams sewn (sans pockets), it was time to attack the top and bottom edges. The top would be folded under and cartridge pleated, so I just tidied it up real quick with a zig-zag stitch and a row of basting to hold the silk twill and silk organza layers together, then moved on to the bottom edge.


The bottom edge would be finished with a hem facing rather than a turned up hem, so I cut 12" wide strips of my African wax print for this facing and started pinning them in place. Then I ran into an issue.


The purple and gold print totally showed through my "candle light white" silk. Dangit! I still really wanted to use the print for my hem facing, so I had some problem solving to do.


I decided to add a second hem facing, of plain white cotton between the print facing and the silk. I cut the white cotton facing about 15" wide so it would go further up the inside of the skirt than the print facing.


I machine sewed the top edge of the print facing to the white facing, then machine sewed the facing to the bottom edge of the skirt, right sides together.


The facing was then under stitched, pressed to the inside of the skirt, and pinned in place.


Thanks to the white hem facing, the print was no longer noticeably showing through! Excellent!!


The white hem facing was then hand-sewn to the silk organza underlining so no hemming stitches would show through on the outside of the dress.


My skirt was hemmed! Now to deal with the top edge.
I double checked how long my skirt needed to be at the center front, side seams, and center back. Then I measured the length of my skirt. I folded the excess to the inside of the skirt - more at the center front where the bodice came down lower, and less at the sides and back - and pressed it in place. Then I proceeded to cartridge pleat that top edge.


Three rows of evenly spaced running stitches.


All the fabric pulled up into tight gathers. 


The sides and center front of the skirt had been marked prior to gathering, so I was able to quickly baste those point to the bodice once the skirt was gathered up.


After the quarter points were basted into place, each individual gather was then whip stitched to the bottom edge of the bodice, just behind the piping.


After a few hours of hand sewing, my dress had a skirt!


Now it was time for the crowning beauty of the whole gown, the one element of the dress I'd been planning the longest - the lace over skirt. I'd better figure out how to make that happen!



Honestly, I probably spent more time in the weeks leading up to making the overskirt, trying to figure out how best to make it, than I spent actually making it. It turned out to be pretty intuitive when it came down to it.


My net lace was over 100" wide and only had a border on one edge. I figured out how long I wanted the longest section of my overskirt, measured that far up from the border's edge and cut the lace to be that wide all the way across. I then sewed up the center back seam (leaving the top 10ish inches open for the button placket) so I had a large loop of lace. My dress was on the dress form already so I put the lace on over the skirt and pinned it in place at the quarter points.


I then worked my way around the dress, pulling up the lace where I wanted it to be shorter, pulling it down a smidgen where I wanted it lower, pinning everything in place as I went along, re-adjusting lengths and pin placement, until I was satisfied with the overall shape.
Once I had tweaked it to my heart's content, I was thrilled with what I saw on the dress form. It now looked like the wedding dress of my dreams!

Mathew was here...love you baby :) This is what happens when you leave me to proof read and you walk away. :D


All the excess lace at the top was tucked to the inside of the overskirt, then off the form the dress came. The lace was whip gathered down to match the waist circumference.


Then it was whip stitched to the bottom edge of the bodice, right on top of the silk skirt.


And with that, the skirt itself, was done. 


Only a few things left to do, such as closures and some heirloom lace details, and my wedding dress would be ready to wear!





Sunday, August 1, 2021

My Wedding Dress - The Lace Sleeves and Collar (Part Five)

Sleeves. Sleevils. Tricky little buggers.

I wanted to avoid them as long as possible, so I didn’t really bother mocking up my wedding dress sleeves.



Ok, I made one sleeve mock-up. I didn’t like it so I abandoned the pursuit of perfecting a sleeve pattern all together and just ignored the fact I wanted sleeves on my wedding dress until it was actually time to make and attach said sleeves. At which point, I formulated a plan.




I wanted full, flared, cap sleeves. Similar to this inspiration image.

To get this shape, the hem of the sleeve needs to curved. There was just one problem with this. I wanted to use the scalloped edge of my bodice lace for the sleeve hem. And this edge was, of course, straight across, not curved in the required simi-circle shape. How could I get the sleeves I wanted out of the fabric I wanted?



After a bit of brainstorming and contemplating pattern shapes and fabric options in my head, I figured it out. I would cut the sleeve pattern out of some sort of netting fabric, then shape my lace border to fit, following the tips and instructions in Bridal Couture for adding a lace border to a curved hem. But what netting would I use as my sleeve base to attach my lace to?



Admittedly, this stumped me for a while. I needed a netting that would be more sturdy than tulle, have a nice drape, not be stiff and itchy and be the exact same shade of creamy white as my lace. I could have ordered something online, but it would have been rather tricky to get the color just right. After contemplating this for way too long, I realized I already the perfect netting. The upper edge of my skirt lace was unembroidered for about the first 12 to 15 inches. It was a nice, soft, sturdy, netting in just the right shade of white. (I never realized how many shades of white there were until I started making a wedding dress!)



Sleeve fabric conundrum solved I looked through my pattern collection until I found something with approximately the right shape - Simplicity 5595. I cut out the sleeve pattern in the largest size, preferring sleeves slightly too large rather than slightly too small in my mash-two-patterns-together-without-making-a-mock-up endeavor. 



I cut the sleeve out of the netting.




Then I carefully cut out the border from either edge of my lace. One edge for each sleeve!



And it was on to shaping the lace to the curved hem of the sleeves!




Where the lace naturally wanted buckle around the curve, I cut small slits between motifs and overlapped the pattern.



Each motif got pinned in place as I went along.



After about an hour or two, per sleeve, my lace was shaped!



I then spent another 6 to 8 hours per sleeve carefully hand sewing the lace border to the netting with itty-bitty invisible stitches.



Oh yes, there's about 20 hours of labor just in making the sleeves. 



That's not counting the time it took to set the sleeves. But we're not there quite yet.



Once the lace was all sewn on, I carefully cut away the netting behind the lace to make the joining of the two fabric look as seamless as possible.


Once that was done I sewed up the underarm seam on each sleeve. Finally some machine sewing on these suckers!


I ran a couple rows of gathering stitches across the sleeve heads.


Then I set the sleeves. 


With the amount of time it took to make each sleeve, setting them was quick and easy!


I finished the armscye with bias tape to match the rest of the bodice insides, and on the outside of the bodice I hand sewed some of the lace from the sleeves to the bodice to make the join look organic.


The sleeves were finally done!


They were on the bodice and wonderfully full and floaty! Now there was just one more thing to do before I was ready to make and attach the skirt - the lace collar.


I had some beautiful embroidered net lace from Malaysia that I wanted to use for the collar. It was white, just like the rest of my laces. Or so I thought. . .


When I took all of my fabrics outside to see how they looked in natural light prior to cutting out my dress I discovered the intended collar lace was actually quite a bit more white than the rest of my laces. So white in fact it looked almost blue in fact! Well that just wouldn't do!


I had two choices. Either find a new lace in the right white shade, or dye my lace a touch darker. I liked the lace I had, so dying it was! I've tea dyed lace in the past, and it's come out a pale tan. Pretty for some things, but not what I wanted for my wedding dress. So off to the internet I went to figure out how to dye white ivory!



After reading multiple sources online, the consciences seemed to be that weak Lady Grey tea was the best dye for the job! Thus, I went to town, bought some Lady Grey, and gave it a go!


I only dyed half of the lace I had, just in case it didn't turn out right!


Thankfully, amazingly, it turned out just right! (Too white lace on the left, tea-dyed lace on the right.)


I breathed a sigh of relief and proceeded with attaching the lace collar to the bodice. I just draped the collar lace directly onto the bodice, shaping and pinning as I went. A few small pleats were required at the shoulders to keep things laying smooth.


I mitered the corners to match my square neckline shape, and added a bit of chain stitch embroidery in attempt to make these seams look decorative since they couldn't be hidden.


Once the shaping was done, the collar was basted in place then the neckline was finished with silk piping and more green floral rayon bias tape!


The bottom edge of the bodice was finished the same way.


And then my wedding dress was half done!


The bodice, the most time consuming, tricky part of this thing, was finished!


It was onto the easy part - the skirt!

If you've missed any part of my wedding dress series, you can catch up here:


And the Undergarments: